To setup Guest and Office SSID on separate VLAN, allowing both VLANs to access Internet but deny Guest to access to Office VLAN. ADSL is setup on the router for Internet access.
See the attached document for command line configurations.
Table Content
- Network Diagram.. 3
-
- Configuring the Cisco Router End. 3
-
- Configuring VLAN Interfaces. 3
-
- Configuring DHCP. 4
-
- Configuring Interfaces. 4
-
- Configuring Wireless Interfaces. 4
-
- Configuring ADSL interface. 5
-
- IP NAT. 5
-
- Default Route. 5
-
- Access List 5
-
- Dialer Overload. 5
-
- VTY Access. 5
-
- Restrict Wireless Guest Access. 5
-
- VTY line access. 5
-
- Configuring Access Point 6
-
- Configuring the SSID. 6
-
- bridge irb. 6
-
- Configuring the Dot11Radio0 interface. 6
-
- Configuring the Dot11Radio0 sub-interfaces. 7
-
- Configuring AP GigabitEthernet0, Sub-interfaces. 7
-
- Configuring BVI Interface 8