Here is my config a little shortened for clarity.
If anyone sees anything that could be causing no connectivity, I
would appreciate some advice on how to proceed from here.
I can ping inside but not out.
ip dhcp excluded-address 192.168.0.2 192.168.0.101
ip dhcp excluded-address 192.168.0.249 192.168.0.254
ip dhcp pool whitepine
network 192.168.0.0 255.255.255.0
no ip bootp server
ip domain name whitepine.local
ip name-server 188.8.131.52
ip name-server 184.108.40.206
ip ssh rsa keypair-name WP2621.whitepine.local
ip ssh version 2
ip address dhcp
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
no cdp enable
ip address 192.168.0.101 255.255.255.0
ip nat inside
no mop enabled
ip route 0.0.0.0 0.0.0.0 76.179.XXX.0
ip nat inside source list 1 interface FastEthernet0/0 overload
access-list 1 permit 192.168.0.0 0.0.255.255
can you try :
Do you have an ip address assigned on fa0/0 from ( i guess youe isp router/modem)?
Can you remove uRPF from the fa0/1 and temporary from fa0/0
Can you reach your next hop defined in your default static?
reload your isp router/modem
Thanks Paul, that was it.