Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Reload due to abort or trace trap

Core Issue

The configuration register is probably set to a value that enables the break key in normal operation.


Issue the config-register command to change the configuration register to a value that disables the break key. The most common value is 0x2102. 

For more information, refer to What Causes a Router To Be Restarted By the Abort or Trace Trap Commands.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 03:39 PM
Updated by:
Everyone's tags (3)