Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Tclsh watch dial pools

Posted By:

jclarke

Posted Date:

Jul 11, 2008

Category:

Capacity Planning

Version:

1.0

License:

Cisco-Style BSD

Summary:

Tclsh script to make total dial pool counts pollable via SNMP

Script Modified Date:

Jul 11, 2008

Cisco IOS Version tested:

12.4

Cisco Products Tested:

7206

Environment Variables used:

Rating Count:

0

Average Rating:

0

File Size:

3.2 KB

Script Info URL:

This tclsh script takes an IP pool name (e.g. a dial pool), and sums  up all of the available addresses in the pool.  It then makes that sum  available for polling via the EXPRESSION-MIB.  Once the script runs, it  will print the object to poll on the vty.  The EXPRESSION-MIB object  will change dynamically as the number of available addresses change.     To execute the script, run:    tclsh dial-pool-cnt.tcl POOL COMMUNITY     Where POOL is a local IP pool name, and COMMUNITY is a valid SNMP  read-write community string on the device.

Version history
Revision #:
1 of 1
Last update:
‎10-26-2011 04:38 PM
Updated by:
 
Labels (1)
Attachments