Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

The %CSM_SLB-4-TOPOLOGY error message is received on the CSM of a Cisco Catalyst 6500 Series switch running CatOS software

Core issue

The %CSM_SLB-4-TOPOLOGY error message occurs if the Content Switching Module (CSM) detects a bridge loop in the network.

The full error message looks similar to this:

%CSM_SLB-4-TOPOLOGY: Module 6 warning: ARP frame from
10.208.136.6 received on VLAN 234

Resolution

In order to resolve this issue, check the bridging device and the bridge-mode configurations of multiple CSMs located in the network.

Note: When a CSM is out of service, the module still replies to Address Resolution Protocol (ARP) requests but not to pings.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 04:43 PM
Updated by:
 
Labels (1)