Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

The "%SYS-4-SYS_LCPERR4:Module [dec]: [Log] Rohini 0: packet buffer P2N EEC1: Log only" error message appears in the logs of a Cisco Catalyst 6500 switch that runs CatOS

Core issue

Cisco Catalyst 67xx modules that run Catalyst OS (CatOS) 8.3.x and 8.4.x sometimes display these error messages in the log:

%SYS-4-SYS_LCPERR4:Module 4: [Log] Rohini 0: packet buffer P2A EEC1: Log only
%SYS-4-SYS_LCPERR4:Module 6: [Log] Rohini 0: packet buffer P2N EEC1: Log only

These messages are log-only, and do not result in a reset of the linecard.

For more information, refer to Cisco bug ID CSCsc48511.

Resolution

This is a software caveat, which is fixed in CatOS 8.5(1) and later versions.

As a workaround, perform a hard reset on the linecard.

2150
Views
0
Helpful
0
Comments