Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

The user is unable to ping the management IP of a Catalyst 2940 series switch, but data traffic works fine

Core issue

A Catalyst 2940 switch may stop receiving traffic on the control plane while it is still able to transmit control traffic. (For example, Bridge Protocol Data Unit (BPDU), Cisco Discovery Protocol (CDP), and so forth). This affects functions that require traffic through the control plane, such as these:

  • Receiving spanning tree BPDUs
  • Receiving Cisco Discovery Protocol (CDP) information from neighbors
  • Receiving pings or ping replies to the switch itself
  • Receiving Address Resolution Protocol (ARP) requests or replies for the switch itself
  • VLAN Management Policy Server (VMPS) VLAN resolution

Normal data flow through the switch between the physical interfaces that does not need to be seen by the switch appears to be un-impacted.

This problem is documented in Cisco bug ID CSCsb84292.

Resolution

For a workaround, soft or hard reset the switch.

In order to resolve this issue, upgrade the Cisco IOS  Software on the switch to the latest maintenance release, which you can download from LAN Switching Software.

For more information, refer to Cisco Catalyst 2940 Series Switches.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 06:14 PM
Updated by:
 
Labels (1)