Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

unable to reload through telnet

Hi

I have problem below.

unable to reload through telnet with error as following.

Reload to the ROM monitor disallowed from a telnet line.
Set the configuration register boot bits to be non-zero.

BOOT variable = disk0:,1;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x102 (will be 0x0 at next reload)

.....................................

NVRAM Verification Failed

Version history
Revision #:
1 of 1
Last update:
‎04-07-2010 11:10 PM
Updated by:
 
Labels (1)