Introduction:
This document is created from user discussion.
Core Issue:
When an AIM-IPS-K9 is installed, a router displayed following message as a part of its boot-up process.
Cisco 3845 (revision 1.0) with 221184K/40960K bytes of memory.
Processor board ID FCZ133670YY
2 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
1 cisco ips sensor(s), ips monitoring on slot O
DRAM configuration is 64 bits wide with parity enabled.
447K bytes of NVRAM.
250880K bytes of ATA System CompactFlash (Read/Write)
*Feb 11 12:52:17.347: %PSE HW—1—PKT ERROR: preparing paktype of SM CONTROL PACKET
*Feb 11 12:52:44.451: %VPN MW—6—INFO LOC: Crypto engine: onboard O State changed to: Initialized
*Feb 11 12:52:44.455: %VPN MW—6—INFO LOC: Crypto engine: onboard O State changed to: Enabled
Solution:
This message will occur when AIM-IPS-K9 installed and its cosmetic message only. There is no impact to the AIM-IPS-K9 or router .No workaround is required.
For more detail, please check CSCsq24774
https://tools.cisco.com/bugsearch/bug/CSCsq24774
Document source:
https://supportforums.cisco.com/discussion/12103281/cisco-3845-error-pse-hw-1-pkt-error-preparing-paktype-sm-control-packet