Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

VLAN filtering for NEXUS etherchannel trunk monitor session

Hi,

I need to packet capture all traffic for a specific vlan configured on an etherchannel trunk interface (on a NEXUS 5548).

A local span was successfully configured, however there appears to be no option to filter a specific vlan for the monitor session and therefore all traffic is being captured. Online documentation seems to suggest there is a way to filter a vlan - however i cannot see the option on the CLI (i am unsure if the filtering applies only to remote span, and not local span).

Anyone know of a way to filter vlans for a monitor session, or know a work-around? I am currently capturing the whole VLAN which is not really what i wanted (and may also forward too much traffic)

Many thanks

current config is simply :-

monitor session 1
  source vlan 123
  destination interface Ethernet1/1
  no shut

Version history
Revision #:
1 of 1
Last update:
‎07-10-2014 06:06 AM
Updated by:
 
Labels (1)
Everyone's tags (1)
Comments
New Member

Hi Rob

I didnt quite understand your query, when you say "whole vlan", do you mean to say all the VLANs including vlan 123?

What exactly are you looking for?

-Balaji