Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

What is the SNMP OID to query the in use and available ds0 channels?

Resolution

The Simple Gateway Monitoring Protocol (SNMP) Object Identifier (OID) is used to query the in use and available Digital Service Zero (DS0) channels.

The MIB you need to look at is CISCO-POP-MGMT-MIB.

This is the OID in question:

.1.3.6.1.4.1.9.10.19.1.1.4

cpmActiveDS0s OBJECT-TYPE

     -- FROM     CISCO-POP-MGMT-MIB

     SYNTAX          Gauge

     MAX-ACCESS     read-only

     STATUS          Current

     DESCRIPTION    "The number of DS0s that are currently in use."

::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10)

ciscoPopMgmtMIB(19) ciscoPopMgmtMIBObjects(1) cpmDS0Usage(1) 4 }

For more information, refer to SNMP Object Navigator.

1366
Views
0
Helpful
0
Comments