12-20-2005 06:04 AM
I have a cat6506 rommon 7.1 (1). What is the largest size of linear Flash PC (PCMCIA) card. Is it 64Mbyte? I only have 128Mbyte. Will a later rommon work i.e. 12.2 17r S5 as I now have IOS on the SP as well as RP.
12-26-2005 10:44 AM
The following Flash PC cards are supported on Catalyst 6500 series
switches:
* MEM-C6K-FLC16M(=)
* MEM-C6K-FLC24M(=)
* MEM-C6K-FLC64M(=)
* MEM-C6K-ATA-1-64M(=)
Prior to software release 7.5(1), Supervisor Engine 1 and Supervisor
Engine 2 supported the following Flash PC cards:
* 16-MB Flash PC card (MEM-C6K-FLC16M=). The device name is slot0:.
* 24-MB Flash PC card (MEM-C6K-FLC24M=). The device name is slot0:.
With software releases 7.5(1) and later, additional Flash PC card
support was added as follows:
* 64-MB ATA Flash PC card (MEM-C6K-ATA-1-64M=)-Only supported on
Supervisor Engine 2. The device name is disk0: and the card requires
ROMMON version 7.1(1) or later releases.
* 64-MB linear Flash PC card (MEM-C6K-FLC64M=)-Only supported on
Supervisor Engine 1. The device name is slot0: and the card requires
ROMMON software release 5.3(1) or later releases.
12-27-2005 10:13 PM
Hi, thanks for the reply, I found http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/6507_01.htm which also seems to support MEM-C6K-ATA-256M for my Supy 2 with IOS, which may be easier to obtain.
Mick
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: