03-17-2007 03:04 AM
I have a issue with 1721 router when ever it boots up all the configurations are gone and it boots up in System Configuration Mode.And after pressing no on all configurations and router>configuration memory it shows the configurations i want the router to boot up directoly
Solved! Go to Solution.
03-17-2007 05:25 AM
Check the value of the Configuration register on the router (you can see the value at the end of "sh version" output). If it is not 0x2102, the change to that value:
router#config t
router(config)#config-register 0x2102
router(config)#exit
router#copy run start
router#reload
03-17-2007 05:25 AM
Check the value of the Configuration register on the router (you can see the value at the end of "sh version" output). If it is not 0x2102, the change to that value:
router#config t
router(config)#config-register 0x2102
router(config)#exit
router#copy run start
router#reload
03-17-2007 09:18 AM
Thanks Ahmad east or west u r the west
03-20-2007 07:31 AM
I mean the best
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: