Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

1721 Boot Issue

I have a issue with 1721 router when ever it boots up all the configurations are gone and it boots up in System Configuration Mode.And after pressing no on all configurations and router>configuration memory it shows the configurations i want the router to boot up directoly

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: 1721 Boot Issue

Check the value of the Configuration register on the router (you can see the value at the end of "sh version" output). If it is not 0x2102, the change to that value:

router#config t

router(config)#config-register 0x2102

router(config)#exit

router#copy run start

router#reload

3 REPLIES
Silver

Re: 1721 Boot Issue

Check the value of the Configuration register on the router (you can see the value at the end of "sh version" output). If it is not 0x2102, the change to that value:

router#config t

router(config)#config-register 0x2102

router(config)#exit

router#copy run start

router#reload

Community Member

Re: 1721 Boot Issue

Thanks Ahmad east or west u r the west

Community Member

Re: 1721 Boot Issue

I mean the best

109
Views
5
Helpful
3
Replies
CreatePlease to create content