I'm not sure what you mean by domains (DNS domains, Windows domains, ?). However, UT will only pick up users once the switches to which those users are connected have been Data Collected by Campus Manager. So, make sure the missing user switches are showing up correctly on the Campus Topology Map with the correct icon.
The first thing to check is that the new users' PCs are running UTLite, and that the UTLite update packets are making it to the CiscoWorks server. The easiest way to do this is to get a sniffer trace on the LMS server, and look for b.com IP addresses.
If the updates are making it to the LMS server, and the MAC address in the update packets is delimited by colons (':'), then you may be hitting CSCsj42193. A patch for this is available by calling the TAC.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...