I have a cisco router 3620 I have configured 20 VPN for my branches offices, the problem is that the load of the CPU arrives at 100%, my conection for this central router is 2 mbps but the traffic average is 600 kbps, my problem not is traffic, but all my branches offices is connected when the load of CPU arrives to 100%.
My consult is:
1- Need other router ?
2- How can I debgu to this router y I to know the problem real?
3- I need concentrator cisco vpn 3020 for this Network design?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...