Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

3750 snmp trap per stack failure

Hi there,

Problem: I have some 3750 with 2 or 3 stack member. if one stack fail, the switch is working normal, "only" some interfaces are not accessible.

is there a possibillity to send a snmp trap, if one of my stack members in a 3750 fails (reboots or crash).

thx in advance

1 REPLY
Blue

Re: 3750 snmp trap per stack failure

If you have "snmp-server enable trap fru-ctrl"

configured on the 3750 stack, a FRURemoved trap (as defined in CISCO-ENITTY-FRU-CONTROL-MIB) should be generated when one of the switches in the stack goes down.

1331
Views
0
Helpful
1
Replies
CreatePlease to create content