Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3825 as L2TP LNS

Can 3825 be used as a L2TP LNS, to terminate 1200 L2TP tunnels received via Ethernet interface? If so, how much RAM would I need to put in? Any caveats?

Regards, Slobodan

1 REPLY
Bronze

Re: 3825 as L2TP LNS

Resolved Caveats - Release 12.4(2)XA2

CSCsc36118: The default route is removed if the one of multiple PPPoE session down

Symptoms: The default route is removed if the one of multiple PPPoE session down.

Conditions: This problem occurs when you configure multiple PPPoE which connect to the same BRAS or same LNS if using L2TP and ppp ipcp route default is configured using Cisco IOS Software Release 12.4(2)T1.

Workaround: There is no workaround. However, you can still turn routing on. For example, configure the multiple default routes pointing to the dialer interface(s) as the next hop.

Try:

http://www.cisco.com/en/US/products/ps6706/prod_release_note09186a0080527f26.html

311
Views
0
Helpful
1
Replies