Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

3845 specific MIB/OID per T1 controller

Hello,

I have a Customer who is looking for a very specific SNMP MIB/OID.

System image file is "flash:c3845-ipvoicek9-mz.124-16.bin"

Would like OID which shows how many DS0s are in use on one particular controller.

Have tried these already and not specific per T1

CISCO-VOICE-DIAL-CONTROL-MIB:

"cvVoIPCallActiveTable"

"1.3.6.1.4.1.9.9.63.1.3.2"

Object cvVoIPCallActiveTable

OID 1.3.6.1.4.1.9.9.63.1.3.2

Object cvCallActiveDS0s

OID 1.3.6.1.4.1.9.9.63.1.3.3

DIAL-CONTROL-MIB:

"callActiveTable"

"1.3.6.1.2.1.10.21.1.3.1"

DIAL-CONTROL-MIB: "callActiveCallState"

"1.3.6.1.2.1.10.21.1.3.1.1.9"

Object callActiveCallState

OID 1.3.6.1.2.1.10.21.1.3.1.1.9

Any ideas would be appreciated.

Thank You.

3 REPLIES
Cisco Employee

Re: 3845 specific MIB/OID per T1 controller

The ideal object for this is cpmDS1ActiveDS0s from the CISCO-POP-MGMT-MIB. However, due to design conflicts between the MIB, and the ISR platforms, this object may not provide accurate results if the T1s have a three tuple index.

Community Member

Re: 3845 specific MIB/OID per T1 controller

Thanks for the update.

Actually they are using that MIB and are having trouble getting good results. They do have the three tuple index as well.

Do you know of any other MIB I could have them try?

Cisco Employee

Re: 3845 specific MIB/OID per T1 controller

I do not believe there is another object which will give you what you want. However, if you can find a CLI command that gives the information, you may consider deploying the EEM custom MIB policy which can extract data from a CLI command, and create a custom MIB object using the EXPRESSION-MIB.

That policy can be downloaded from http://forums.cisco.com/eforum/servlet/EEM?page=eem&fn=script&scriptId=1743 .

592
Views
0
Helpful
3
Replies
CreatePlease to create content