I have a 7204VXR exporting NetFlow v9 to a collector. I would like to start exporting certain fileds but for the life of me I can't find the commands to define a v9 template. I know you have to create a flow exporter , collector and monitor first. In the collector you define the fields that you want to export and finally bind the collector to the source interface. the problem I am facing is that all the commands needed to do that do not work on 7204VXR. CISCO seems to no longer have command reference for IOS 12.3(26), on 7204VXR.
Below are the commands I have tried on 7204VXR
flow monitor <monitor name> --------> not recognized
flow record <record name> ----------> not recongized
flow collector <collector name> -------> not recognized
I am at my wits end. Any help is immensely appreciated.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...