Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

7600 CPUs

If I snmpwalk a 7600 with dual sups with cpmCPUTotal5minRev I get:

CISCO-PROCESS-MIB::cpmCPUTotal5minRev.1 = Gauge32: 1 percent

CISCO-PROCESS-MIB::cpmCPUTotal5minRev.2 = Gauge32: 2 percent

CISCO-PROCESS-MIB::cpmCPUTotal5minRev.3 = Gauge32: 0 percent

I'm assuming I have another cpu on one of the boards. Are they numbered in the order they are in the chassis? If so, it seems odd the redundant sup would have high cpu.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Blue

Re: 7600 CPUs

You can find what each CPU is by querying the Cisco-Entity-MIB, specifically the entPhysicalName and entPhysicalDescr OIDs. From what I've seen, modules such as the FlexWAN cards have multiple CPUs on them too.

Cisco Employee

Re: 7600 CPUs

Poll the cpmCPUTotalPhysicalIndex for these indexes, then poll entPhysicalName and entPhysicalDescr from the ENTITY-MIB to get the details for each CPU.

3 REPLIES
Blue

Re: 7600 CPUs

You can find what each CPU is by querying the Cisco-Entity-MIB, specifically the entPhysicalName and entPhysicalDescr OIDs. From what I've seen, modules such as the FlexWAN cards have multiple CPUs on them too.

Cisco Employee

Re: 7600 CPUs

Poll the cpmCPUTotalPhysicalIndex for these indexes, then poll entPhysicalName and entPhysicalDescr from the ENTITY-MIB to get the details for each CPU.

Community Member

Re: 7600 CPUs

Thanks guys.

159
Views
0
Helpful
3
Replies
CreatePlease to create content