I'm using CiscoView 6.1.7 on LMS 3.0.1.
When I try to use CiscoView on a 7604 I receive a router partial layout with four level, first with a yellow text "Unsupported Card", second with a WS-X6724-SFP and the correct layout, the third e fourth card are empty.
The show version output is :
----------------------------------------
RT-XT1#show version
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 10-Oct-07 08:10 by prod_rel_team
ROM: System Bootstrap, Version 12.2(33r)SRC3, RELEASE SOFTWARE (fc1)
RT-XT1 uptime is 6 weeks, 3 days, 1 hour, 21 minutes
Uptime for this control processor is 6 weeks, 3 days, 1 hour, 20 minutes
Time since RT-XT1 switched to active is 6 weeks, 3 days, 1 hour, 21 minutes
System returned to ROM by reload (SP by reload)
System restarted at 09:37:25 CET Fri Mar 13 2009
System image file is "disk1:c7600rsp72043-advipservicesk9-mz.122-33.SRB2.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco CISCO7604 (M8500) processor (revision 2.0) with 851968K/65536K bytes of memory.
Processor board ID FOX1216GNMX
CPU: MPC8548_E, Version: 2.0, (0x80390020)
CORE: E500, Version: 2.0, (0x80210020)
CPU:1200MHz, CCB:400MHz, DDR:200MHz,
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Last reset from power-on
4 Virtual Ethernet interfaces
26 Gigabit Ethernet interfaces
3964K bytes of non-volatile configuration memory.
507024K bytes of Internal ATA PCMCIA card (Sector size 512 bytes).
Configuration register is 0x2102
-----------------------------------------
Any suggestion ?
thank's
Claudio
