Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

7606-S router not supported on Configuration Management RME4.1.1

I've check teh documentation of RME4.1.1 and it says that 7606-S is already supported. But our client has 2 7606-S that are not supported on the configuration management of RME. Check box for teh devices are grayed and unable to check. RME is also unable to backup the config. Ive also upgrade my RTR7000 to ver7.2

Is there a bug on RME4.1.1?

3 REPLIES
Cisco Employee

Re: 7606-S router not supported on Configuration Management RME4

If you have Rtr7000 package 7.2 loaded, then either it is not loaded properly for RME to use, or you have other package problems. The dcmaclient.log should have some more details.

New Member

Re: 7606-S router not supported on Configuration Management RME4

hi joe,

I've attached the dcmaclient.log.

I've also have an eroor http status 500 after upgrading the device package of 7606-S for RMe, the error shows when I click common services>device update> resource manager essentials, ive attached the screenshoot as well.

Cisco Employee

Re: 7606-S router not supported on Configuration Management RME4

See this thread:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc22b85

If you follow the steps to sync your package directories, and re-generate your RME package map, both of these problems should go away.

110
Views
0
Helpful
3
Replies