aaa authentication login default group radius local
aaa authentication login conlogin group radius local
aaa authentication enable default group radius enable
Login works fine, but if I try to go into enable mode it lets me through if I type either the password configured on the Radius server or the local enable password. When the local enable password is used the debug on the router says that the radius server could not be found.
Enable authentication was meant to fucntion with TACACS, and when used with RADIUS it does not
perform the same. As a result, the only way for you to get enable authentication to work with RADIUS would be to input the username $enab15$ into your RADIUS server and every user would need to use that username.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.