A way to get OSPF events on CW LMS...

[ptrigueira]

Hi guys,

I need to have OSPF events/traps to appear on CW in some way, but OSPF traps are not supported in DFM.

Is there any way to extened DFM capabilities (like using RME - syslog for instance)

Apreciate your help,

Pedro Trigueira

[Joe Clarke]

RME may be a good alternative depending on the IOS version you have. For IOS 12.4, here is a link to the various OSPF-related syslog messages:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124sup/124sms/124smsv2/sm_22h.htm#wp429297

You can then use the RME Automated Action feature to turn these messages into email messages or whatever you need for further notification.

[ptrigueira]

Hi,

Is it possible in RME to turn theses messages into traps ?

P

[Joe Clarke]

Yes, you could do it, but not out-of-the-box. You could create an automated action script that calls Net-SNMP's snmptrap command to create a corresponding OSPF trap, or build a custom trap of your own design.

The Net-SNMP suite can be found at http://net-snmp.sourceforge.net .