Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

About Ciscoview Mini-RMON issue

Dear All,

Two question please help

1.router such as 831,871,2801 etc.whether support Mini-RMON(router self have this function )

2.ciscoview mini-rmon whether support device 831,871.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: About Ciscoview Mini-RMON issue

You can manually config RMON events and alarms on the routers to watch the dot3StatsFCSErrors and dot3StatsSingleCollisionFrames for the interface in which you're interested. See http://www.cisco.com/en/US/tech/tk961/technologies_configuration_example09186a0080094478.shtml for more on setting up RMON events and alarms from the CLI.

3 REPLIES
Cisco Employee

Re: About Ciscoview Mini-RMON issue

The 2801 is supported provided it has an ethernet switching module installed. the 831 and 871 are not supported, and do not have mini-RMON capabilities.

New Member

Re: About Ciscoview Mini-RMON issue

Thanks!

Would you please tell me any other way so that i can setup collision or CRC detection function and can receive alert about this?

Cisco Employee

Re: About Ciscoview Mini-RMON issue

You can manually config RMON events and alarms on the routers to watch the dot3StatsFCSErrors and dot3StatsSingleCollisionFrames for the interface in which you're interested. See http://www.cisco.com/en/US/tech/tk961/technologies_configuration_example09186a0080094478.shtml for more on setting up RMON events and alarms from the CLI.

129
Views
0
Helpful
3
Replies