Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

about "show ip route summary"

Please .."show ip route summary".. teach of the following.

>bgp XX 80132 18622 6320256 14326656

^^^^^^^^

Please teach the computational method of "14326656".

Which object in MIB is used and is calculated?

R1# show ip route summary

IP routing table name is Default-IP-Routing-Table(0)

Route Source Networks Subnets Overhead Memory (bytes)

connected 0 4 256 576

static 0 1 64 144

eigrp 6 0 5 768 720

bgp XX 80132 18622 6320256 14326656

http://www.cisco.com/warp/public/459/41.html#bgpreceivedtable

  • Network Management
1 REPLY
Anonymous
N/A

Re: about "show ip route summary"

The Memory shown in the output of show ip route summary denotes the number of bytes allocated to maintain all the routes for the particular route source.

Think the memory pool MIB which provides information on the amount of used and free DRAM on the active system, can be used to check this value.

790
Views
0
Helpful
1
Replies