Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Active SNMP monitoring of RPS675 at CISCO 2811

Hi!

I've difficulties getting an usable response while asking for the status of the RPS. These are the objects I have tried:

CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusTable.1

CISCO-ENTITY-FRU-CONTROL-MIB::cefcFRUPowerSupplyTable.1

CISCO-C2900-MIB::c2900InfoRedunantPowerSupplyInfo.1

CISCO-STACK-MIB::chassisPs2Status.1

The 1st one just lists the main power supply and the rest doesn't exist on agent.

Is there a way to actively access the RPS status?

Our IOS image is version 12.4(8).

I forgot to mention that the RPS is connected and working, output of my "show env":

Main Power Supply is AC

Redundant Power Supply is attached

RPS status: ready/available

Thanks for your help!

Marco

5 REPLIES
Cisco Employee

Re: Active SNMP monitoring of RPS675 at CISCO 2811

What response are you getting when you just walk the objects without .1 on the end? Does it return the full table?

New Member

Re: Active SNMP monitoring of RPS675 at CISCO 2811

I get the full table for CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusTable and nothing for the other oids:

CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusDescr.1 = STRING: Main Power Supply

CISCO-ENVMON-MIB::ciscoEnvMonSupplyState.1 = INTEGER: normal(1)

CISCO-ENVMON-MIB::ciscoEnvMonSupplySource.1 = INTEGER: ac(2)

The other OIDs are just explaining "No Such Object available on this agent at this OID".

Cisco Employee

Re: Active SNMP monitoring of RPS675 at CISCO 2811

What type of device is this?

New Member

Re: Active SNMP monitoring of RPS675 at CISCO 2811

As mentioned in the subject it's an RPS675 thats connected to an 2811 (integrated services router). The redundant power supply has no network interface and is simply connected to AC power and the router.

New Member

Re: Active SNMP monitoring of RPS675 at CISCO 2811

Is there really no chance?

We just don't want to recieve any traps because it's the router outside.

244
Views
0
Helpful
5
Replies