Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

adding cisco ASA/fwsm to ciscoworks

Can gurus here help with procedure on how to add ASA firewall/fwsm to ciscoworks, if this is possible.

Links pointing to same would also be helpful.


Cisco Employee

Re: adding cisco ASA/fwsm to ciscoworks

ASAs and firewalls are added like any other device. They must have SNMP configured, and they must allow the CiscoWorks server to poll them. Then, go to Common Services > Device and Credentials > Device Management, and click the Add button. Fill in the device display name and IP address and/or hostname. Click Next, and fill in the telnet/SSH username and password. Click next, and fill in the SNMP read-only community string. Then click Finish.

Hall of Fame Super Silver

Re: adding cisco ASA/fwsm to ciscoworks

Note that even with the latest update of CiscoWorks LMS (Version 3.2 with all package updates) your functionality is limited in some ways for these types of devices. Neither is supported by CiscoView and the ASA is not supported in the Campus Manager component.

Reference for details.