Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Adding devices to DCR by mask

Hello, please help me to add group of devices by mask: 10.10.xxx.62.

Is it possible to automate?

4 REPLIES
Blue

Re: Adding devices to DCR by mask

Probably, via "/opt/CSCOpx/bin/dcrcli cmd=imp fn=/path/to/device-list.csv ft=csv", mostly depending on what nifty stuff you do generating "device-list.csv".

Community Member

Re: Adding devices to DCR by mask

Is it possible to automate discovery in this range?

Blue

Re: Adding devices to DCR by mask

Maybe there's a better way in LMS 3.x, but with LMS 2.x, you can always have a script "ping sweep" the target IP ranges, then only dump those IPs that respond to pings to the "device-list.csv" that dcrcli will import from.

Cisco Employee

Re: Adding devices to DCR by mask

You can do this in LMS 3.0.1 and higher. LMS 3.0.1 has a Device Discovery feature which will allow you to ping sweep a given network range, then import all SNMP-reachable devices into DCR. Versions of LMS prior to 3.0.1 only support a CDP discovery. You can still limit the network discovery to a certain range, but all devices in that range must be connected via CDP.

128
Views
0
Helpful
4
Replies
CreatePlease to create content