Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

Blue

Adding Responder enabled devices in IPM

Is it possible to have IPM turn on "IP SLA responder" on responder-capable devices, or would it only require enabling the responder separately outside of IPM, such as via NetConfig or manual config on IOS CLI?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Adding Responder enabled devices in IPM

You would need to enable this outside of IPM as you say. Netconfig is a good way of doing this.

1 REPLY
Cisco Employee

Re: Adding Responder enabled devices in IPM

You would need to enable this outside of IPM as you say. Netconfig is a good way of doing this.

153
Views
0
Helpful
1
Replies
CreatePlease to create content