Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

Adding WLSE to Ciscoworks as application

I am trying to add WLSE 2.13 as an application to my Ciscoworks. I dont know if WLSE accepts SSO (Single Signon).

7 REPLIES
Cisco Employee

Re: Adding WLSE to Ciscoworks as application

What version of CiscoWorks? How are you trying to add it? The CiscoWorks LMS/CSM/OM SSO is not compatible with the WLSE.

New Member

Re: Adding WLSE to Ciscoworks as application

CW is ver 4.0.5. Anyway to have CW sso to WLSE>

?

Cisco Employee

Re: Adding WLSE to Ciscoworks as application

The WLSE is supported by RME. You can add the WLSE to DCR as a Standard device, and RME will manage it. As for SSO, this will not work between LMS and the WLSE.

New Member

Re: Adding WLSE to Ciscoworks as application

Any clues as to when SSO might be supported in WLSE?

Cisco Employee

Re: Adding WLSE to Ciscoworks as application

This is not planned as the WLSE does not use Common Services.

New Member

Re: Adding WLSE to Ciscoworks as application

Sorri, forgot to add that I have added it as application under Common services,Home PageAdmin

Cisco Employee

Re: Adding WLSE to Ciscoworks as application

You can add the WLSE as a link on the CiscoWorks Homepage, but you cannot use the LMS SSO authentication mechanism to authenticate to the WLSE.

123
Views
0
Helpful
7
Replies
CreatePlease to create content