We are running LMS 3.1. Notification services are configured under DFM. We do receive alerts with event occurance, but don't get notification when device come back to normal state per event code. Any help will be appreciated.
This probably has to do with how you have configured your notification group. Make sure you have both active and cleared checked as well as both critical and informational. The informational severity is required because cleared events/alerts are informational even though the event/alert they describe may have been critical.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...