Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

ALIAS command

Hi,

Does anyone know how the alias command of a pix can be implemented on a router?

Thanks

1 REPLY
Blue

Re: ALIAS command

try and use the 'NAT outside' command(s).

this is what has replaced the PIX 'alias' command functionality for the PIX so this sounds like it should work with IOS.

(haven't tried it but logically it sounds doable)

please see the following link for more info on the PIX alias command replacement:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aee.shtml

please see the following links for more info on IOS NAT outside:

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f2f.shtml

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f8e.shtml

204
Views
0
Helpful
1
Replies
CreatePlease to create content