Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

All Encompassing QoS?

I want a simple QoS policy map to cover everything because I want to test the " show poilcy-map" command and see what outputs I can get from that.  I am just not sure what QoS I can put in that would cover everything.  Any ideas?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

That will vary significantly

That will vary significantly according to the platform and use case you're trying to mock up. for instance a L2 switch vs. a core router vs a WAN edge will all have different QoS commands available and applicable.

You might have a look at the sample configurations in the Cisco Medianet Campus QoS Design Guide and work from those as a starting point.

1 REPLY
Hall of Fame Super Silver

That will vary significantly

That will vary significantly according to the platform and use case you're trying to mock up. for instance a L2 switch vs. a core router vs a WAN edge will all have different QoS commands available and applicable.

You might have a look at the sample configurations in the Cisco Medianet Campus QoS Design Guide and work from those as a starting point.

21
Views
0
Helpful
1
Replies