Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

an object name for the command sh hardware fabric-utilization on Nexus

Hello,

does the customer use SNMP for the monitor a fabric-utilization on Nexus?? He wants to monitor values from the command "sh hardware fabric-utilization":

sh hardware fabric-utilization

> ------------------------------------------------

> Slot        Total Fabric        Utilization

>              Bandwidth      Ingress % Egress %

> ------------------------------------------------

> 1             184 Gbps          3.0       3.75

> 2             184 Gbps          4.0       4.25

> 3             184 Gbps          5.0       4.62

> 4             184 Gbps          4.0       4.0

> 5              92 Gbps          0.0       0.0

> 6              92 Gbps          0.0       0.0

he uses snmpwalk

> snmpwalk -v2c -c public ip-address  -On > switch

>

here is the output for slot1

>

> .1.3.6.1.2.1.47.1.1.1.1.2.22230 = STRING: "xbar-1 Outlet  (s1)"  ==

> ingres

> .1.3.6.1.2.1.47.1.1.1.1.2.22231 = STRING: "xbar-1 Intake  (s2)" ==

> egress

> .1.3.6.1.2.1.47.1.1.1.1.2.22232 = STRING: "xbar-1 Crossbar(s3)" ==

> total

>

> OIDs in the ENTITY-MIB.

he tried to use a filter for the xbar-1 Outlet

> ob@ns1main:~$ cat switch | grep 22230

> .1.3.6.1.2.1.47.1.1.1.1.2.22230 = STRING: "xbar-1 Outlet  (s1)"

> .1.3.6.1.2.1.47.1.1.1.1.3.22230 = OID: .1.3.6.1.4.1.9.12.3.1.8.29

> .1.3.6.1.2.1.47.1.1.1.1.4.22230 = INTEGER: 32

> .1.3.6.1.2.1.47.1.1.1.1.5.22230 = INTEGER: 8

> .1.3.6.1.2.1.47.1.1.1.1.6.22230 = INTEGER: 1

> .1.3.6.1.2.1.47.1.1.1.1.7.22230 = STRING: "xbar-1 Outlet  (s1)"

> .1.3.6.1.2.1.47.1.1.1.1.8.22230 = ""

> .1.3.6.1.2.1.47.1.1.1.1.9.22230 = ""

> .1.3.6.1.2.1.47.1.1.1.1.10.22230 = ""

> .1.3.6.1.2.1.47.1.1.1.1.11.22230 = ""

> .1.3.6.1.2.1.47.1.1.1.1.12.22230 = STRING: "Cisco Systems"

> .1.3.6.1.2.1.47.1.1.1.1.13.22230 = ""

> .1.3.6.1.2.1.47.1.1.1.1.14.22230 = ""

> .1.3.6.1.2.1.47.1.1.1.1.15.22230 = ""

> .1.3.6.1.2.1.47.1.1.1.1.16.22230 = INTEGER: 2

> .1.3.6.1.4.1.9.9.91.1.1.1.1.1.22230 = INTEGER: 8

> .1.3.6.1.4.1.9.9.91.1.1.1.1.2.22230 = INTEGER: 9

> .1.3.6.1.4.1.9.9.91.1.1.1.1.3.22230 = INTEGER: 0

> .1.3.6.1.4.1.9.9.91.1.1.1.1.4.22230 = INTEGER: 0

> .1.3.6.1.4.1.9.9.91.1.1.1.1.5.22230 = INTEGER: 2

> .1.3.6.1.4.1.9.9.91.1.1.1.1.6.22230 = Timeticks: (206227326) 23 days,

> 20:51:13.26

> .1.3.6.1.4.1.9.9.91.1.1.1.1.7.22230 = INTEGER: 60

> .1.3.6.1.4.1.9.9.91.1.2.1.1.2.22230.1281 = INTEGER: 10

> .1.3.6.1.4.1.9.9.91.1.2.1.1.2.22230.1282 = INTEGER: 20

> .1.3.6.1.4.1.9.9.91.1.2.1.1.3.22230.1281 = INTEGER: 4

> .1.3.6.1.4.1.9.9.91.1.2.1.1.3.22230.1282 = INTEGER: 4

> .1.3.6.1.4.1.9.9.91.1.2.1.1.4.22230.1281 = INTEGER: -128

> .1.3.6.1.4.1.9.9.91.1.2.1.1.4.22230.1282 = INTEGER: -128

> .1.3.6.1.4.1.9.9.91.1.2.1.1.5.22230.1281 = INTEGER: 2

> .1.3.6.1.4.1.9.9.91.1.2.1.1.5.22230.1282 = INTEGER: 2

> .1.3.6.1.4.1.9.9.91.1.2.1.1.6.22230.1281 = INTEGER: 1

> .1.3.6.1.4.1.9.9.91.1.2.1.1.6.22230.1282 = INTEGER: 1

> .1.3.6.1.4.1.9.9.92.1.1.1.11.22230 = ""

> .1.3.6.1.4.1.9.9.117.1.5.1.1.1.22230 = INTEGER: 2

> .1.3.6.1.4.1.9.9.195.1.4.1.1.22230 = ""

but there is not value which is seen in the show command.:-(

Does any mib object exists for monitoring these values??

Thank you.

Roman

Everyone's tags (3)
1 REPLY

an object name for the command sh hardware fabric-utilization on

i also tried cant find anything that can monitor this right now

1187
Views
0
Helpful
1
Replies
CreatePlease to create content