Sorry to jump on your thread but I have the same issue running LMS Prime 4.1 - fresh install. I have verified the ANServer.properties file and appears not to be corrupted.
I have re-initalised the database - which appears to be completed successfully but this process still fails to start ( note : i had to use PS_explorer to kill a process which still had the DB file open despite the service being stopped to do the re-initalisation successfully )
I installed using local admin to a directory with no spaces in it ( c:\program_apps ) running on Windows 2008 SP2 inside a ESX3.5.
State = Failed to run
Pid = 0
RC = -2
Signo = 1073741822
Start = N/A
Stop = 11/04/2012 13:34:20
Core = Not applicable
Info = Application failed or was registered incorrectly.
I have no data inside the LMS yet but cant progress this issue at the moment to add anything in.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...