Re: ANIServer is still initializing during more than 20 mn
With the whole LMS bundle on a server, there are a lot of CPU-intensive processes that get kicked off.
Things that help load time are more CPUs and more memory. You didn't mention how many real CPU cores this machine has or how many devices you are managing, but 20-30 minutes before all the LMS daemons are up is generally the norm.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...