Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

application: sends,receieves packets and logs everything with time

hi all

I need a tool which is able to send TCP/UDP/IGMP , and receieve on remote pc, log the activities with time.

if communication is cut then become alive again (like STP steps until forwarding), i need to log the packet delivery failure time in the scale of miliseconds.

anybody used such an application?

all advices will be appreciated

tx a lot in advance for helping

  • Network Management
2 REPLIES

Re: application: sends,receieves packets and logs everything wit

Hello,

with a cisco router you could use SAA (service assurance agent). It will send defined packets to configured destinations at a rate configured. You can obtain the statistics and failures through SNMP and/or CLI.

For a full description of capabilities have a look at "Network Monitoring Using Cisco Service Assurance Agent"

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a008030c773.html

In case you want a solely PC based solution have a look at "Network Monitoring" http://www.netmon.org/tools.htm

There are a couple of tools (even freeware) which should be helpful.

Hope this helps! Please rate all posts.

Regards, Martin

New Member

Re: application: sends,receieves packets and logs everything wit

thanks a lot Martin,

I read the document, SAA looks just what I am looking for but unfortunately it seems SAA works well for routers but not for switches :( I am gonna use the stuff for 4506 switches.

I hope netmon.org will be my last stop :)

greetings

92
Views
5
Helpful
2
Replies