cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
911
Views
0
Helpful
3
Replies

As to see logs in the 6509

Hello

I have a 6509 with this features:

Cisco Internetwork Operating System Software

IOS (tm) c6sup2_rp Software (c6sup2_rp-JS-M), Version 12.1(27b)E, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by cisco Systems, Inc.

Compiled Fri 10-Feb-06 13:25 by hqluong

Image text-base: 0x40008F90, data-base: 0x41B50000

ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)

BOOTLDR: c6sup2_rp Software (c6sup2_rp-JS-M), Version 12.1(27b)E, RELEASE SOFTWARE (fc2)

swg-a0-azr uptime is 12 weeks, 2 days, 18 hours, 24 minutes

Time since swg-a0-azr switched to active is 12 weeks, 2 days, 18 hours, 26 minutes

System returned to ROM by power-on (SP by power-on)

System restarted at 18:45:16 WET Sat Oct 13 2007

System image file is "sup-bootflash:c6sup12-js-mz.121-27b.E.bin"

cisco WS-C6509 (R7000) processor (revision 3.0) with 112640K/18432K bytes of memory.

Processor board ID TBP06170186

R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

60 Virtual Ethernet/IEEE 802.3 interface(s)

18 Gigabit Ethernet/IEEE 802.3 interface(s)

381K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x102

Since 10 days, I can't see logs in console. When I make:

#sh loggin

Syslog logging: enabled (240 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns)

Console logging: level informational, 18808 messages logged

Monitor logging: level debugging, 3777 messages logged

Buffer logging: level debugging, 0 messages logged

Exception Logging: size (4096 bytes)

Trap logging: level notifications, 1766760 message lines logged

Logging to 172.16.40.125, 1766760 message lines logged

Log Buffer (4096 bytes):

My configuration is:

logging history informational

logging trap notifications

logging source-interface Vlan1

logging 172.16.40.125

Can anyone help me?

Thanks in advanced.

Jose

3 Replies 3

David Stanford
Cisco Employee
Cisco Employee

Did you also add:

logging console

or

term mon

Hello Davistan

Thanks for your response, but this didn't resolve the problem.

The problem persist.

Jose

yjdabear
VIP Alumni
VIP Alumni

If you're saying you don't see anything with "show logging" on the device, have you configured "logging buffered [buffer size] debugging"? Right now, it shows "Buffer logging: level debugging, 0 messages logged" while "Monitor logging: level debugging, 3777 messages logged".

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco