ASA 5505 periodically locking down internet interface
First off, my apologies if I've posted this in the wrong forum.
Got an ASA 5505, loved it until now when it periodically seems to cut off internet access. It will still route internally but nothing can get outside. We have about 40 7940 IP phones and whenever the ASA locks up, these all act like they've been unplugged from the network. The ASA just started doing this, and appears to do it every 1 to 2 days.
Anyone experience this as well? I've attached my config (edited :) so hopefully if I've done something bone headed someone can point it out. Thanks in advance!
Re: ASA 5505 periodically locking down internet interface
For example, you have one VLAN assigned to the outside for Internet access, one VLAN assigned to an inside business network, and a third VLAN assigned to your home network. The home network does not need to access the business network, so you can use the no forward interface command on the home VLAN; the business network can access the home network, but the home network cannot access the business network.
If you already have two VLAN interfaces configured with a nameif command, be sure to enter the no forward interface command before the nameif command on the third interface; the adaptive security appliance does not allow three fully functioning VLAN interfaces with the Base license on the ASA 5505 adaptive security appliance
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...