Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

Auto config archive of FWSM with LMS 3.2

Hello,

is there a way to archive the config files of a FWSM automatically such as from a switch?

I looked for syslog messages like I get them from switches (%SYS-5-CONFIG). But I can't find anything like that.

Severity level is notification on FWSM.

Is there a way to trigger Config fetch in RME?

Thanks a lot!

1 REPLY
Blue

Re: Auto config archive of FWSM with LMS 3.2

The default "Config Fetch" under RME - Tools - Syslog - Automated Actions has an entry "PIX-*-5-111005:*". Extrapolating from that, perhaps you want to edit "Config Fetch" or build your own AA by adding in "FWSM-*-5-111005:*", and possibly ""ASA-*-5-111005:*" for the sake of being comprehensive.

http://www.cisco.com/en/US/docs/security/fwsm/fwsm23/system/message/fsmemsgs.html#wp1038950

Error Message %FWSM-5-111005: IP_address end configuration: OK

Explanation This message is logged when you exit the configuration mode. The IP_address value indicates whether the login was made at the console port or through a Telnet connection.

Recommended Action None required.

240
Views
0
Helpful
1
Replies