We do not recommend using third party applications to backup LMS data. Instead, use the built-in LMS backup to backup the data, then backup the backup using a file system backup program.
That is, use whatever backup suite you like to backup the server's file system, but do not rely on it to restore LMS data. Instead, if you need to do a system restoration, first restore the OS, and applications, then restore the LMS data from the backup created by LMS.
As for compatibility, I have heard of no other customers running Time Navigator. I cannot say if there will be issues.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...