Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bandwidth Distribution

Hi!

I have Cisco 837 ADSL Router and 1Mbps Internet. Is it possible to distribute bandwidth on its four ethernet ports? Secondly, is it possible to access its Web Interface in IE7 or IE8. I have tried a lot but it only works in IE6.

Apologize if this is not the correct forum to ask this kind of question.

Thanks!

1 REPLY

Re: Bandwidth Distribution

Are you using SDM? SDM only supports IE6.

If you use CCP, you can use IE7 as per the release notes:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/v1_4/rlsnts/ccp_rel_notes.html

Regarding BW distribution, it is possible. I believe on the 837, there are 4 switchports and 1 ethernet port.

In that case you can assign the switchports to vlans and use class-maps, service policy and use the keyword bandwidth to configure the bandwidth you want to allocate.

http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/12_4/qos_12_4_book.html

Example:

interface FastEthernet3

description ETC

switchport access vlan 3

no cdp enable

service-policy output ect_policy

policy-map ect_policy

class ect_class_voice

bandwidth 64

class class-default

bandwidth 128

class-map match-all ect_class_voice

match protocol h323

299
Views
5
Helpful
1
Replies