Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Baseline template and compliance check in LMS 2.6

I have to change all the SNMP strings on a large (3000+ devices) network. I want to use a Baseline Template to first check that the new strings have been applied and then check that the old strings are removed. I also need to ensure that the correct ACL is applied to each string. Using RME 4.0.5 user guide I have tried a Basic Template of + snmp-server community {string1} rw {acl#) and many variations of this. When I run it against a router that I know has {string1} the job returns a non-compliant result. Am I using the correct syntax Or what an I missing. Any help will be greatly appreaciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Baseline template and compliance check in LMS 2.6

Correct.

4 REPLIES
Cisco Employee

Re: Baseline template and compliance check in LMS 2.6

Assuming your string is "notprivate" and your ACL is 3, the syntax will be:

+ snmp-server community notprivate RW 3

Since it looks like that's what you did, it would be helpful to see the exact config and the exact baseline template. It may be that RME does not have the latest configuration archived for this device.

New Member

Re: Baseline template and compliance check in LMS 2.6

I'm a bit red faced...Thank you for curing my tunnel vision. As soon as I read your response I knew my error - "ro" vs "RO" Just to make sure I understand what I'm looking for:

+ snmp-server community newstring RO 3

- snmp-server community oldstring RO 3

in compliance = newstring applied AND oldstring removed

Cisco Employee

Re: Baseline template and compliance check in LMS 2.6

Correct.

New Member

Re: Baseline template and compliance check in LMS 2.6

Thank You

215
Views
5
Helpful
4
Replies