Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Super Bronze

BBSM 5.3 RDP/Terminal Services Access

Hi

We've got a BBSM 5.3 SP2, to which we can't get RDP/TS access for management - is this normal?

From the box itself we've noted that you can RDP to itself on it's external interface, but not to the Internal interface.

We've tried changing the binding in TS config to 'All Adapters' with no luck.

If we telnet to port 3389, we get a http response - I believe that ISA is intercepting the connection, and that we probably need to define a filter of some sort to allow the connection.

Trouble is I don't know how to do that... does anyone out there?

Or am I barking up the wrong tree? Is there a simpler way to permit RDP access?

Thanks

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
1 REPLY
Silver

Re: BBSM 5.3 RDP/Terminal Services Access

check the following link for a similar issue :

http://wwwin-tools.cisco.com/casekwery/getServiceRequest.do?id=601234383

86
Views
0
Helpful
1
Replies