We are designing a network for a one of our customers, as shown in the attachment..
I am very new BBSM, so i am really unsure, if it would work this way..
We have the following requirements.. Please suggest if it would work..? If yes, give some pointers on how to make it work...
Thank you in advance!
1) All the Wired Tenant users behind the FWSM, must be allowed internet access without being challenged with any authentication information..! However, each tenant must be bandwidth controlled.. (Probably based on their IP subnet info..)
2) The Wireless guest Vlan shown is actually a vlan bridged by the WLC4402 controller.. The users in this network must be challenged for access codes.. I understand for this network, i must implement null switch method in BBSM, how ever i could not understand this fully yet..
3) If item #1, is possible, guess i must use null switch option even for the wired tenants.. but i am unsure on how to configure this, as they are located behind the FWSM..
In a nutshell, i could not understand much on BBSM from the CCO documentation , so any other pointers would be highly appreciated..
We are implementing a l3 network with 3750's at the edge & 6509's at the core with resilient FWSM's.I would like to be able to set up multiple VLANS on the 3750's to allow access to the internet via BBSM also to be able to use bandwidth management per user feature of BBSM.Any thoughts would be welcome.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.