Network Management

I am configuring a GSS as a DNS for a financial institution. This is for the intranet purpose. The existing DNS server is integrated with AD. Once the DNS server is replaced with GSS, will the GSS support AD authentication ? If yes, kindly share the ...

Hi, How to get tcam utilization by using snmp on ASR100x ? Sent from Cisco Technical Support iPad App

Hello allI'm new to regex and I'm trying to make a baseline template, that will check our network devices for our required basic configuration.What I'm trying to do is to make a template that will look for either a loopback0 or loopback1 interface.If...

Hello!I have 4 switches of 3750. I need toupgrade all the switches, but I can't to disconnect the stack cable.How I can to upgrade the version without to disconnect the stack cable?Sent from Cisco Technical Support iPhone App

Router#cellular 0/0/0 cdma activate otasp *228Beginning OTASP activationOTASP number is *228.After execution of "cellular 0/0/0 cdma activate otasp *228" on the global prompt of the router... will  see output “OTASP number is *228.” Log on the consol...

Hi all.Hope i can get some help as i am quite noive in Cisco and still learning.I am tasked with configuring an AP as a repeater.I have reset the AP to defaults and configured it in CLI with the below:configure terminalinterface dot11radio 0ssid JDC-...

Hello,I have a problem with LMS 4.2 user tracking.When I generate a report on all my network all mac address are ok but there is no Hostname/Ip address in the result, except for 2 equipments.the only difference between these 2 equipements and the res...

Hi,I have a Cisco Prime LMS 4.1 running on my network, and I am creating Jobs to configure access-list, snmp commands. I can make ping/telnet/ssh from Cisco Prime LMS CLI to the devices (routers or switches), but when a Job is scheduled it fails. Wha...

Hello, I wanted get erros for an interface by gets snmps from a external software. for exemplo, from Linux machine I'm able type snmpwalk -c public -v 1 ip_of_my_switchso it's return all OID avaliable for that device. what I wish is find out what is ...

Hello supportforum memebers,Does anybody know what hardware in the NCS appliance (http://www.cisco.com/en/US/products/ps11686/index.html) exist?What CPU / RAM / HDD / ...?Thanks  Sebastian