Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Boot from flash problem

Hello,

We have a 4506 switch that when I boot it up goes directly to Rommon. But I am getting an error:

******** The system will autoboot now ********

config-register = 0x2102

Autobooting using BOOT variable specified file.....

Current BOOT file is --- cat4500-ipbasek9-mz.122-53.SG.bin

Invalid filename cat4500-ipbasek9-mz.122-53.SG.bin. It must begin with device name.

Here is the out put of the dir command:

Switch#dir

Directory of bootflash:/

5 -rwx 16169468 Feb 11 2000 08:16:10 +00:00 cat4500-ipbasek9-mz.122-53.SG.bin

Here is the boot coammnds from the running-config:

boot-start-marker

boot system flash cat4500-ipbasek9-mz.122-53.SG.bin

boot-end-marker

!

I want the switch to boot from the image file but I am doing something wrong.

Any help very much appreciated,

Pedro

1 REPLY
Blue

Re: Boot from flash problem

Is "boot system flash cat4500-ipbasek9-mz.122-53.SG.bin" in startup-config?

Or, try "boot system flash bootflash:cat4500-ipbasek9-mz.122-53.SG.bin" in the startup-config.

407
Views
0
Helpful
1
Replies