Call Manager & IP Phones in LMS 4.1 topology

[Fazal E Rasool Khan]

Hi Guys,

I have installed LMS 4.1 and discover all the devices (router/switches) but i want to show IP Phone on the LMS. I am unable to discover call manager in LMS 4.1 topology.

In Call Manager 8.6 in Cisco Serviceability under snmp setting i have enable the read community string and check snmp, MIB service are running.

AM i using the correct proecdure. How can i get the Call Manager on LMS server so that i can see IP phones on LMS topology.

8.6 is installed on VM Ware.

Looking for your reply.

Need urgent Help

Thanks in advance.

Regards,

[Fazal E Rasool Khan]

Looking for replies in the above issue..Have to solve ASAP.

Thanks

[Vinod Arya]

Just replied on :

https://supportforums.cisco.com/thread/2162934

Along with SNMP process, the Call Manager process should also be running.

You can check if the snmp is reachable from LMS server, do a snmpwalk on CUCM either from Device Centre or you can do is from NMSROOT/objects/jt/bin/snmpwalk.

Syntax:

NMSROOT/Objects/jt/bin>snmpwalk -v -c

Example:

NMSROOT/Objects/jt/bin>snmpwalk -v 2c -c public 10.10.10.1 .1.3.6.1.2.1.1

-Thanks

[Zaher Juha]

Facing the same problem

with LMS 4.2.2

have you solve it fazal from tera

this is zaher

[Fazal E Rasool Khan]

Hi Zaher,

you have to add Call Manager server in the the LMS  and add the SNMP details for LMS server details in the call manager, as far as i remember its in serviceability. Check once.

You will get the result as shown in attached images.